 |
|
 |
|
- Event Supplied Corner Marshals
- Free Event Shirt With Each Entry
- Buy two $75 entries get one entry free
|
|
 |
|
 |
|
|
- Any wheel/Tire manufactured for competition may be used as long as
it meets the class specs.
- Tires must be of one piece in circumference.
- No sectioning or piecing tires together.
- No spikes, tubes, or additional items to be glued to the outside of
tires or passed through from the inside.
- Only tires manufactured for a specific class may be used. Must be
rubber only and available as a tire for that class.
- No tires created for other vehicle types even if they fit the
specifications will be allowed.
- Cutting or modifying the tread is allowed. Modifying the tire
carcass in anyway is prohibited.
- Brakes in working condition on all cars is mandatory. Cars should be
able to sit still with the engine still running, while the brakes are
applied.Exhaust pipes are also required on every car. The maximum sound
level is 85 decibels, measured at a ninety degree angle to the side of
the car from a distance of 30 feet, 3 feet above the ground, with the
car at maximum throttle and at all speeds. Any pipe made for specific
class and engine allowed and legal. No modifications allowed.A car that
loses its exhaust pipe will be black-flagged.Variable exhaust timing,
porting, or exhaust pipes with movable parts are not allowed.
- All engines must be available through hobby shops or available to
public.
- Throttle return spring, rubber band, etc must be in place.
- No Fuel additives Lipo's must be charged in a "lipo" sack unless
charged in your trailer. This is for the safety of the surrounding
racers.
|
Monster Trucks (Nitro & Electric) Scale: 1/8th and 1/10th
|
- To be an Monster Truck, the lowest point of the engine must sit at least 1.5" inches above the lowest point along the front-back centerline when compressed (usually the "skid plates").No flat Chassis plate (1/8 buggy or arena truck) chassis.
- To tech questionable ETs, remove the wheels, place MT on flat surface, compress the vehicle fully and a ruler (or 1.5" gage) could be used vertically to measure the engine above the surface. No flat chassis (1/8 buggy style).
- Diesel Conversions are legal.
- ELECTRIC TRUCKS WILL BE REQUIRED TO MAKE PIT STOPS OR A BATTERY CHANGE TO EQUAL NITRO STOPS. DURATION AND FREQUENCY TO BE DECIDE AT EACH EVENT..
- Examples that fit within the above definition: T (and S) -Maxxes, Savage, MGT, Revo, TNX/TC, and LST.
| Engine / Motor |
No Limitations on motor size / type |
| Max Weight |
No maximum Weight |
| Min Weight |
No minimum weight |
| Electric or Lipo |
Both are allowed |
| Tire Size |
No minimum or maximum measurements |
|
Nitro Areana Truck Scale: 1/8th
|
| Wheel Base |
Minimum: 12" / Maximum: 16" |
| Max vehicle widt |
18" (Outside tire to outside tire) |
| Transmission / Diff |
Single speed direct drive (1/8 buggy) style driveline only |
| Engine |
.21 through .30 |
| Carb |
No Size restrictin
Must be mounted securely to the motor |
| Exhaust |
Pipes must meet the 85 decibel limit and have no movable parts in them |
| Minimum weight |
8lbs. 6 oz |
| Fuel Tanks and Filters |
Single fuel tanks only no more than 150mililitres/cc.
This includes fuel line from tank to carb and filter(s). |
| Bodies |
Must be made for arena truck class |
| Bumpers |
Bumpers are optional. If used, must not extend further than 1" past the body on the front and rear |
| Rear Spoiler/Wing |
Stock or aftermarket wing made for class. |
| Skid Plates |
Skid Plates must not extend further than 1" past the body on the front and rear. |
| Wheels |
Must be manufactured for Arena Trucks |
| Tires |
See tire/wheel rule
Must be available on the market and produced for the specific class.The new LPR wheels and tires are legal. |
The Panther LP is referenced for this size and will be the absolute smallest tire legal.
|
|
| Maximum Buggy Length |
28.74" (730mm) |
| Maximum Buggy Width |
12.20in. (310mm) |
| Maximum Buggy height |
9.84in. (250mm) |
| Buggy wheel base |
Minimum: 10.8" (270mm)
Maximum: 13.2" (330mm) |
| Minimum weight |
7lbs .05oz (3.2 kilos) |
| Wheel diameter |
Minimum: 3.2" (81.28mm)
Maximum: 3.54" (90.0mm) |
| Wheel mounting |
Wheels must be securely mounted at all times |
| Maximum wheel width |
1.98" (50.45mm) |
| Tire Diameter |
Minimum: 4.3" (109.22mm)
Maximum: 4.7" (119.38mm) |
| Maximum tire width |
2.03" (51.59mm) |
| Engine |
.21 Only |
| Fuel Tank |
Maximum 125mililitres/cc.
This includes fuel line from tank to carb and filter(s). |
| Transmission |
Single speed only |
| Bodies |
Buggy or other off-road style body that resembles an actual off-road racing vehicle |
| Tires |
See tire/wheel rule
Must be available on the market and produced for the specific class. |
Note: Maximum height is measured with suspension fully compressed.
|
Electric Buggy Scale: 1/8th
|
| Maximum Buggy Length |
28.74" (730mm) |
| Maximum Buggy Width |
12.20in. (310mm) |
| Maximum Buggy height |
9.84in. (250mm) |
| Buggy wheel base |
Minimum: 10.8" (270mm)
Maximum: 13.2" (330mm) |
| Minimum weight |
7lbs .05oz (3.2 kilos) |
| Wheel diameter |
Minimum: 3.2" (81.28mm)
Maximum: 3.54" (90.0mm) |
| Wheel mounting |
Wheels must be securely mounted at all times |
| Maximum wheel width |
1.98" (50.45mm) |
| Tire Diameter |
Minimum: 4.3" (109.22mm)
Maximum: 4.7" (119.38mm) |
| Maximum tire width |
2.03" (51.59mm) |
| Batteries |
4S, 5S or 6S lipo. No MAH limit. Batteries must be in good physical shape no cut, damaged or swollen pack allowed. Hard cases not required. Batteries must be secured properly in the vehicle, strapped or clamped into place before the event begins. |
| Motor |
Brushless no limitation. Sensored or sensorless. |
| Transmission |
Single speed only |
| Bodies |
Buggy or other off-road style body that resembles an actual off-road racing vehicle |
| Tires |
See tire/wheel rule
Must be available on the market and produced for the specific class. |
Notes:
Batteries MUST ALWAYS be charged in a charging sack specifically designed and marketed for the purpose of charging lipos.
Maximum height is measured with suspension fully compressed.
Electric buggies may not run with the Nitro buggies.
|
Electric Arena Truck Scale: 1/8th
|
| Wheel Base |
Minimum: 12" / Maximum: 16" |
| Max vehicle width |
18" (Outside tire to outside tire) |
| Transmission / Diff |
Single speed direct drive (1/8 buggy) style driveline only |
| Motor |
Brushless no limitation. Sensored or sensorless |
| Batteries |
4S, 5S or 6S lipo. No MAH limit. Batteries must be in good physical shape no cut, damaged or swollen pack allowed. Hard cases not required. Batteries must be secured properly in the vehicle, strapped or clamped into place before the event begins. |
| Minimum weight |
8lbs. 6 oz |
| Bodies |
Must be made for arena truck class |
| Bumpers |
Bumpers are optional. If used, must not extend further than 1" past the body on the front and rear |
| Rear Spoiler/Wing |
Stock or aftermarket wing made for class. |
| Skid Plates |
Skid Plates must not extend further than 1" past the body on the front and rear. |
| Wheels |
Must be manufactured for Arena Trucks and must be securely mounted at all times |
| Tires |
See tire/wheel rule
Must be available on the market and produced for the specific class.The new LPR wheels and tires are legal. |
Notes:
The Panther LP is referenced for this size and will be the absolute smallest tire legal.
Electric Arena Trucks may not run with the Nitro Arena Trucks.
Batteries MUST ALWAYS be charged in a charging sack specifically designed and marketed for the purpose of charging lipos.
Maximum height is measured with suspension fully compressed.
|
Open CORR/Torque Offroad Truck Class(electric) Scale: 1/10th
| |
1.) First lets all keep in mind that this class is a fun class. This class will involve a lot of young kids who have a blast doing it. Just remember to have fun!
2.) Any 1/10 2wd truck that is available to the public and made as a "CORR" type truck allowed(Traxxas Slash, HPI Blitz, AE SC10, Losi Strike, Etc)
3.) Must use either stock body or aftermarket body designed for truck. Added wings are not allowed.
4.) Any tire/rim combination allowed that is marketed for the CORR Trucks. No cutting/making tires. 1/8 Scale rims/tires NOT allowed. Tires/wheels must remain in stock form, zero modifications allowed.
5.) Batteries allowed will be either one 7.2 volt(6cell) nicad/nimh or one 2s 7.4 volt lipo batter. No mah limit.
6.) Motor: Nothing below a 13.5 Brushless. Must be available to the public.
7.) Chassis: Must remain in stock form,no modifications(Length, width, etc)
8.) Must be 2wd and may use ball or gear differentials.
9.) Have Fun!
Stay tuned for Rule additions to this class....
|
|
